scrapbook, trimcraft, video

Scrapbook Layout – Dovecraft Lost and Found

Sometimes layouts come together really fast – even though you’ve done minimal preparation or planning. This was one of those layouts. I did the initial stages: I cut the tree shape on my silhouette – chose my paper, then decided it needed a darker border, so did that, adding Distress Oxide in Frayed Burlap around the edge, as well as using the Dovecraft distress tool. I stitched around the edge of the main paper, which admittedly took some time but I was also watching something on Netflix at the same time which probably made it take a little longer…

but yes, after those initial things, and still with no real plan for the layout, everything just fell into place. I really do love it when that happens.

5

The process video can be watched here:

Almost everything used is from the Lost & Found collection – apart from the aforementioned Oxide, some Distress Stain in Tarnished Brass, and the phrase sticker in the top right, which is from my stash. It may possibly be an old Kaisercraft something, but I’m not 100% sure.

4

Note: If you think the stamping looks a little faded – it’s on purpose. I decided to go with second generation stamping for a more muted effect.

2

Oh, I should add: the bear and the compass around the photo cluster were embellishments I’d made previously for other projects by adding oxides to cardstock, stamping the images (which are from the collection) over the top with StazOn ink, then fussy cutting them out.

3

Puffy stickers and buttons from the collection were my main go-tos for this layout, but I used a fair few other bits too. One thing that was totally spur of the moment was adding the washi to strips of card stock, cutting the card to size, then adding those strips the layout. One up the right side and one under the photo cluster. Totally unplanned, but I ended up really liking it.

0

Then towards the end I wasn’t totally happy with that washi up the side, so added some of the twine from the collection next to it. It’s adhered at the back with washi, but I stapled it on too, just to stop the twine from going too astray!

And there we have it – more info is in the process video, plus links to the collection and other items used. Thanks so much for reading ❤

6

card making, how to, papercrafts, trimcraft, tutorial

Banner Cards with First Edition Let’s Celebrate: How To

4

In this post I’m going to be showing you how to make this fun, but incredibly simple banner cut out card. I’m not good with fancy-fold cards (my brain isn’t mathematical enough!), but I do occasionally like to make cards that are just a *little bit* different.

To make this you will need:

  • an 8×8″ paper pad (or larger). I used First Edition’s new release, ‘Let’s Celebrate’ for mine
  • A sentiment stamp, and decorative stamps if desired too
  • Heat Embossing Equipment (ink, powder, heat tool)
  • Ink Pad
  • 5×7″ white card blank (or white cardstock large enough to make your own)
  • Banner Die 3 x 4.5″ (7.5 x 11.5cm) – if you don’t have this then don’t worry too much!

To Start:

blogpost1

Die cut two banner shapes. If you don’t have the die (my set was from The Works  but they don’t seem to have them available online right now), then not to worry! It’s a very easy shape to cut yourself, just use the measurements listed above.

blogpost2

Back each of your banners on a contrasting paper and cut around leaving a border of a few mm. If you have the appropriate sized die you can just cut that and use it to back the original shape, but I find it easier to do it this way!

blogpost3

Attach the banners to your 5×7″ card blank (I go for double sided tape as my adhesive, but use whatever your preference is). Make sure each banner is at the very edge of the card at the left edge and then on the top and bottom edges.

blogpost4

Cut around the banner shapes using scissors or a craft knife, again, whichever your preference. Be careful to only cut through one layer of card and not the back too!

blogpost5

Cut another contrasting paper to just under 5 x 7″ and attach to the inside of the card.

And that’s it for the card shape! You can now decorate however you wish, but I’ll show you how I did mine to give you an idea.

blogpost6

Stamp and emboss a sentiment on a paper scrap, about 2-2.5″ wide (about 5cm).

blogpost7

Cut the paper you’ve stamped into a smaller square or rectangle, back with a contrasting paper leaving a 2mm-ish border, then attach to a longer, but slightly narrower strip of paper.

blogpost8

Attach to card and finish with some stamping!

It is up to you whether to attach your decorative piece to just one or to both banners, if you attach it to just one then the banners can ‘open’ separately, however…

When you make a vertical card – only attach the sentiment/sentiment cluster to the bottom banner. If you attach it to the top banner then gravity will work against you and it will droop!

This card shape also works great horizontally:

8

6

How super easy is that?! You can then write your message on the inside of the banners or on the back of the card.

3

If you’d like to see some more projects with Let’s Celebrate, then check out the Inspiration Area of Trimcraft’s The Craft Blog.

Grace ❤

 

card making, how to, mixed media, papercrafts, trimcraft, tutorial

Mixed Media Anniversary Card – How To

1

Hi all! I have a post today to show you how to make this pretty mixed media card. Today is my parents’ 30th Wedding Anniversary, which is the ‘pearl’ anniversary, so I wanted to make something with lots and lots of pearls. Of course you could use this style and techniques to make any sort of card you wanted, and use any papers, but I will list the items I used to help you get an idea of what is needed.

I used:

A3 cardstock

First Edition Sweet Nothings 12×12 Paper Pad

Dovecraft Distressing Tool

Paper Flowers, various colours and sizes

Clear Glass Beads

White thread

Flat back pearls (lots!)

White Gesso

3D Gloss Gel/Gel Medium

I wanted to make a huge card, so I started with A3 white card to create my card blank. The card measures 7.5″ by 8″, so you will need to cut a piece 15″ by 8″, and score down the middle to create your card blank.

2

Matt the front of the card with three contrasting papers, one just under 7.5 x 8″, one 7 x 7.5″, and the front one 6.75 x 7″. Distress the edges of the centre paper.

For the centrepiece, I cut the numbers on my silhouette in the font ‘Beyond the Mountains’. I offset the numbers by about 0.3″ and separated the two cut files so the darker ’30’ could be backed by the lighter one. If you do not have a silhouette or other electronic cutting machine you can print out a template and then draw and cut around it, the shapes are not too complicated so it shouldn’t take too long.

3

Distress the edge of the larger 30, then adhere as seen in the photo below, so the numbers slightly overlap and so still leave a border of the green paper underneath. Also so there isn’t an awkward bit of green poking out where the number three ‘dips’ inward on the right edge.

9

Now it’s time for the messy bit, start by lightly sponging some white gesso on the corners of the card:

5

Gather together all your embellishments ready to put on. I also cut the ‘mum and dad’ with my silhouette with pearlescent paper (PEARLescent, geddit?!).

7

Add the gel medium (or other adhesive, you basically want something that will dry transparent with a gloss finish) in the first corner you’re embellishing.

6

Then add the thread, loop it around your fingers, make knots, whatever you like. It will look messy at first but works once all the items are in place and gives a lovely shabby-chic look.

8

Then start adding the rest of your embellishments! You may need to add more gel as you go. Start from largest to smallest. So I started with the large paper flowers, then the smaller pink ones, then large pearls, medium pearls, etc, and finish with the glass beads and tiny pearls to fill in any gaps.

ea

If adding a small title or sentiment like I did with the ‘mum and dad’ cut, then add this at the very end.

Finish by painting a light layer of gesso over the flowers to help tie them in to the theme of the card – if your flowers are white or ivory you may not need to do this, but mine had a hint of yellow which I wanted to hide.

10

The gesso layer also contributes to the shabby-chic effect.

You can dry with a heat tool but I find it better with all these embellishments to leave it overnight to dry.

And it’s finished! One thing to remember with this card, make sure you have an envelope, or the equipment to make an envelope, that is big enough, as it is a BIG card!

f

Thank you so much for reading. If you make your own version of this card then I’d love to see it, so please tag me on social media! Let me know if you have any questions, and if you’re a bit new to or confused by mixed media, then I have a Mixed Media Basics video up on my YouTube channel (it’ll be published a few hours after this blog post), there’s a link to my channel up at the top of this page underneath my logo.

Grace / ms.paperlover ❤

card making, flipbook, how to, papercrafts, trimcraft, tutorial

Wander-Bee Flipbook

Ok, ok, I have been somewhat remiss in my blogging… whoops! The end of 2017 and the beginning of 2018 have been a little ‘aaargh!’ (in both good and bad ways). Now that things are starting to settle down I’m hoping to get back to blogging… and be better than before too.

So enough waffle, on with today’s post. I owed my lovely penpal Julie (instagram: @plannerprettiesandpaper) a snail-mail flipbook. And as I was little behind on my mail to her, I wanted to make something extra special.

The gorgeous Trimcraft collections, Dovecraft’s Bee Happy, and First Edition’s Wanderlust are not necessarily similar, but they have some elements that work together really well. So, the ‘Wander-Bee’ collection was born, and it’s first project, this flipbook:

 

I didn’t do a process video, or take process photos (otherwise there’d be hundreds!). But I thought I’d go through each ‘page’ of the flipbook with you to tell you how it was made.

The cover is this shaker card. All the hexagons (and all that you’ll see throughout the flipbook) I cut on my silhoutte machine. Due to how busy the shaker element is I only added light embellishments: the bee puffy sticker and gold buttons from Bee Happy, and the ‘hello’, which was from my stash. The only Wanderlust element here is the paper I used to die cut the ‘Bee Happy’. In the shaker itself is a mix of gold sequins and stars, gold glitter, coarse yellow glitter, and copper coloured  micro beads.

12

Next was this simple ‘pocket’ page. To make this I cut one of my (many) pre cut hexagons in half (well, just over), and adhered it to the base with a thin layer of double sided tape around the edges. I embellished it with Bee Happy ribbon and a button, as well as both fussy and die cut elements from both Bee Happy and Wanderlust. You can just see the goodies I put in that pocket slightly out of shot to the top right.

8

This page probably took me the longest to make, as I had to figure out how to make a hexagon-shaped envelope. I tried following an origami tutorial on YouTube but it was WAY too complex. So I just made it up instead. I used brads and twine to keep it shut (it’s full of various die cut shapes and stickers), and decorated around the edge with that slim leaf washi (from my stash). I finished with the sentiment topper from Bee Happy and a Wanderlust fussy cut butterfly.

6

Next was another page with a simple pocket, made in the same way as last time. But this one is more Wanderlust-y. The bow is made with the bow-sewing technique (let me know if you’d like a blog post on that – I have shown it in a video but I can’t remember which one!). In this pocket I put a load of project life/journal cards.

This is one of the back pages, with added envelope flip-out. This one is a real mix of Bee Happy and Wanderlust, and possibly my favourite page. The small envelope (smallest size on the WE R Memory Keepers’ 1-2-3 Punch Board) is mounted on a 4×2.5″ piece of card, which is then attached with washi tape on both sides. The tape isn’t actually from the Wanderlust collection, believe it or not! It’s a Dovecraft tape from last year. The envelope is filled with little stickers.

5

The page at the very back I kept simple, with the three Bee Happy Hexagons and wood veneer piece, and a couple of Wanderlust fussy cut butterflies.

And here’s the finished product:

41

Thanks so much for reading. Check out Trimcraft’s The Craft Blog for more ideas and inspiration with these collections.

Grace ❤ @ms.paperlover

 

Christmas, how to, papercrafts, trimcraft, tutorial

Super Simple Christmas Crafts 1 – Gift Box With Paper Poinsettia (with Templates)

6

Aren’t these gift boxes cute? I love a Poinsettia, though I generally avoid having them in the house as they’re midly toxic to cats and mine has a tendency to chew on house plants.

So instead – I made some paper ones to decorate these gift boxes! I have a few people this year who are getting multiple small presents from me, rather than one big one. So I needed some lovely boxes to put all those little gifts in – though even the people who get one thing might be getting a box as well, I just love making them!

For the more traditional box on the right I used the First Edition Gift of Christmas Paper Pad, and for the one on the left I used the First Edition Merry Little Christmas.

The instructions on how to make these can be found in my corresponding video tutorial – it is a little long and rambly, sorry about that, I’m out of practice with video tutorials!

Here are the templates for the Poinsettia leaves, I used the first file for the ‘petal’ leaves, and the second for the larger leaves on the bottom.

For Silhouette Users:

Poinsettia Leaves 1

Poinsettia Leaves 2 

To print and cut as a template:

Poinsettia Leaves 1 PDF

Poinsettia Leaves 2 PDF

Of course if you have some leaf dies you can use those too, my templates really are very simple shapes. It would however be a good idea to have a few different sizes of leaf for the full effect.

3

Right then, happy crafting everyone! Do tag me in anything you make and share – I’d love to see!

cropped-logo-crimbo.png

Grace ❤ @ms.paperlover